Description
Product Description:
The Timloc FRstop Cavity Stop Sock Fire Barrier offers premium localized fire protection, acoustic flanking insulation, and thermal efficiency within external masonry cavity walls. Precisely engineered to fit standard 125mm wide wall cavities, this high-performance barrier works effectively to restrict the dangerous spread of fire, toxic smoke, and hot gases along floor levels, party wall junctions, and rooflines. It delivers a robust 1 hour of fire integrity, maintaining structural safety compartmentation lines across commercial and residential developments. Composed of low-resin, non-combustible rockfibre mineral wool encased inside a durable 35-micron protective polythene outer sleeve, the unit remains fully shielded from on-site weather elements during building construction. Its compressed, lightweight friction-fit design ensures easy handling, tightly filling the entire void to prevent localized cold air bridging and minimize external acoustic pollution between adjacent rooms.
Product Specifications:
• Brand: Timloc
• Height: 100mm
• Length: 1.2m
• Material: Rockfibre Mineral Wool / Polythene Sleeve
• Size: 125mm x 1.2m
• Width: 140mm
• Colour: Green
• Product Type: Cavity Stop Sock Fire Barrier
Additional Features:
• Delivers 1 full hour of physical fire integrity combined with an essential minimum of 15 minutes of thermal insulation defense.
• Encased in a green-coded polythene sleeve for rapid on-site size checks and dependable weather resistance during active construction phases.
• Significantly lowers acoustic flanking sound transmission across internal party wall junctions to meet architectural acoustics guidelines.
• Features a low thermal conductivity rating of 0.037 W/mK to eliminate uninsulated bypass pathways and lower thermal loss.
• Independently certified by Warringtonfire to ensure structural compliance with Robust Details, Approved Document B, and NHBC regulations.
Care Instructions:
• Store lengths horizontally in a clean, dry, sheltered location prior to use to protect structural performance.
• Fit firmly with tightly aligned butt-joints during building setup to establish a continuous physical barrier against smoke and flame bypass.
• Avoid slicing or ripping the primary protective sleeve along its length unless necessary for final corner profiling.

