Description
Product Description:
The Timloc FRstop Cavity Stop Sock Fire Barrier provides essential fire protection, acoustic dampening, and thermal efficiency within external masonry cavity walls. Designed for standard 100mm wide cavities, this pre-formed barrier effectively restricts the spread of smoke, hot gases, and flames along the roofline, floor levels, and party wall junctions. It achieves up to 1 hour of fire integrity, helping to maintain strict safety compartmentation across residential and commercial buildings. Constructed from low-resin, non-combustible rockfibre mineral wool encased in a protective 35-micron polythene sleeve, it is fully shielded from on-site weather elements during construction. Its lightweight, compressible design allows for an easy friction-fit installation that securely fills the entire cavity width, preventing cold air bridging while minimizing flanking noise pollution between building compartments.
Product Specifications:
• Brand: Timloc
• Height: 100mm
• Length: 1.2m
• Material: Rockfibre Mineral Wool / Polythene Sleeve
• Size: 100mm x 1.2m
• Width: 110mm
• Colour: Blue
• Product Type: Cavity Stop Sock Fire Barrier
Additional Features:
• Provides a robust 1 hour of fire integrity combined with a minimum of 15 minutes of thermal insulation performance.
• Encased in a colour-coded blue polythene sleeve for instantaneous on-site size identification and excellent weather protection during installation.
• Effectively reduces acoustic flanking transmission at party wall junctions to ensure compliance with building noise isolation guidelines.
• Exhibits a low thermal conductivity of 0.037 W/mK to reduce air movement and eliminate localized cold bridging points.
• Independently tested by Warringtonfire to fulfill Approved Document B, NHBC standards, and Robust Details requirements.
Care Instructions:
• Keep stored in a dry, covered area prior to installation to ensure structural insulation performance is preserved.
• Ensure lengths are tightly butt-jointed during fitting to maintain a continuous fire and smoke seal without gaps.
• Trim any excess polythene outer sleeve carefully at junctions and fold it back over the edge to maintain site weather protection.

