Description
Product Description:
The Embrass Peerless Blue PVC Washing Machine Inlet Hose offers a high-performance, long-reach plumbing connection designed to feed cold water safely into domestic appliances. Measuring an extended 2500mm (2.5 meters) in length, this premium heavy-duty supply line provides the ideal solution for utility rooms, kitchens, or laundry spaces where appliances are situated further away from the primary water isolation valves. Constructed from high-grade, pressure-resistant PVC and colored blue to denote standard cold-water lines, it easily handles standard mains water pressure fluctuations. Equipped with universal 3/4″ BSP threaded fittings on both ends—one straight connector for the wall valve and one 90-degree angled space-saving connector for the back of the machine—it guarantees an instant, tool-free mechanical connection that eliminates water leaks and supply failures.
Product Specifications:
• Brand: Embrass Peerless
• Material: PVC
• Length: 2500mm
• Fittings: 3/4″ BSP Threaded (1 x Straight, 1 x 90° Angled)
• Colour: Blue
• Product Type: Washing Machine Inlet Hose
Additional Features:
• Generous 2500mm length provides essential flexibility to pull appliances out for cleaning or servicing without disconnecting lines.
• Pre-fitted with heavy-duty internal rubber washers inside the plastic retaining nuts to ensure an instant, drop-tight seal without plumbing tape.
• Molded 90-degree angled coupling allows appliances to be pushed flush against the back wall, saving valuable floor space and preventing hose kinking.
• Reinforced structural layers provide reliable defense against pressure bursts, line swelling, and room-temperature water fatigue.
• Supplied in the trade-preferred P1 Pre-Pack format to isolate the clean internal threads and rubber washers from job-site dust, humidity, and grit until installation.
Care Instructions:
• Isolate the water supply valve and check that both pre-fitted internal rubber sealing washers are sitting flat inside the hose nuts before connection.
• Thread the straight coupling onto the cold water service valve and the angled coupling onto the appliance inlet valve; hand-tighten firmly.
• Do not use heavy wrenches or water pump pliers to tighten the plastic nuts, as over-torquing can crack the fittings or distort the washers. Turn on the water slowly to test for leaks.
Warranty Information:
• Warranty Period: 2 Years
• Coverage: Material manufacturing splits, end-fitting separation, and premature pressure burst failures under normal indoor parameters.
• Conditions: Valid when properly installed on standard domestic washing machines or dishwashers connected to cold water lines following standard guidelines.

